Operator's Manual

CleaningtheSparkArrester
ServiceInterval:Every100hours
Note:Asparkarresterisavailableasanoption.If
yourequireasparkarrester,contactyourAuthorized
ServiceDealer.GenuineT orosparkarrestersare
approvedbytheUSDAForestryService.
WARNING
Iftheenginehasbeenrunning,themufer
willbehot.Contactwithhotsurfacesmay
causepersonalinjury.
Keepyourhands,feet,face,clothingand
otherbodypartsawayfromthemuferand
otherhotsurfacesuntiltheyhavecooled.
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowtheenginetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page28).
4.Removethedividerplate(ifequipped);referto
RemovingtheDividerPlate(page28).
5.Removethe2nuts(8mm)andremovethe
muferfromthecylinder(Figure50).
g019331
Figure50
1.Deector(if
applicable)
5.Exhaustpipe
9.Sparkarrester
2.Protector
6.Nut(8mm)10.Screws(5mm)
3.Screw(6mm)7.Gasket
11.Exhaustport
4.Mufer8.Bolt(8mm)12.Screw(4mm)
6.Removethe3screws(4mm)fromtheexhaust
deector,andremovethedeector(Figure50).
7.Removethescrews(5mmand6mm)from
themuferprotector,andremovethemufer
protector(Figure50).
8.Removethescrews(4mm)fromthespark
arrester,andremovethesparkarresterfromthe
mufer(Figure50).
9.Useabrushtocarefullyremovecarbondeposits
fromthespark-arresterscreen(Figure51).
Note:Replacethesparkarresterifithas
breaksorholes.
g208746
Figure51
1.Screen
2.Brush
10.Installthesparkarrester,muferprotector,
exhaustdeector,andmuferinthereverse
orderofdisassembly.
11.Installthedividerplate(ifequipped);referto
InstallingtheDividerPlate(page28).
RemovingandInstalling
theEngine
RemovingtheEngine
WARNING
Thespringisundertensionwheninstalled
andcancausepersonalinjury.
Becarefulwhenremovingthespring.
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowtheenginetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page28).
4.Removethedividerplate;refertoRemovingthe
DividerPlate(page28).
5.Removethebeltguide;refertoAdjustingthe
BeltGuide(page45).
6.Removethebelts;refertoRemovingtheBelts
(page44).
36