Operator's Manual

3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page27).
4.EnsurethattheclutchleverisintheOFF
position.
5.Aligntherearbelttothereargrooveinthe
enginepulley.
Note:Donotaligntherearbelttotheidler
pulley.
6.Aligntheforwardbelttotheforwardgrooveof
theidlerpulley.
7.Sliptherearbeltovertheidlerpulleyandalign
thebelttotherearpulleygroove.
8.Sliptheforwardbeltovertheenginepulleyand
alignthebelttotheforwardpulleygroove.
9.Checkthebelttension;refertostep4through6
inAdjustingtheBeltT ension(page41).
10.Looselysecurethebeltguidetotheengine
(Figure65)withtheboltthatwasremovedin
step6ofRemovingtheBelts(page42).
11.Adjustthebeltguide;refertoAdjustingtheBelt
Guide(page43).
12.Installthedividerplate;refertoInstallingthe
DividerPlate(page27).
AdjustingtheBeltGuide
Note:Toaccessthebeltguide,removethedivider
plate;refertoRemovingtheDividerPlate(page27).
Guideairgap:2.5to4.0mm(3/32to5/32inch)
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowthemachinetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page27).
4.EnsurethattheclutchleverisintheONposition.
5.Ensurethatthebelttensioniscorrect;referto
AdjustingtheBeltTension(page41).
6.Checkthattheairgapbetweenthebeltguide
andthebeltsis2.5to4.0mm(3/32to5/32
inch);refertoFigure67.
g020011
Figure67
1.Enginepulleys4.Beltguide
2.Belts5.Bolt
3.Guideairgap:2.5to4.0
mm(3/32to5/32inch)
7.Iftheairgapisnotwithinthespeciedrange,
dothefollowing:
A.Loosentheboltthatsecuresthebeltguide
totheengine(Figure67).
Important:Ensurethatthebeltguideis
towardtheenginepulley.
B.Rotatethebeltguideupordownuntilthere
isanairgapof2.5to4.0mm(3/32to5/32
inch)betweentheguideandeachbelt
(Figure67).
Important:Thebeltguideshouldnot
contactthebeltswiththeclutchleverin
theONposition.
Note:Iftheairgapbetweenthebeltguide
andbothbeltscannotbeattained,then1of
thebeltsistoolong.
C.Tightentheboltthatsecuresthebeltguide
totheengine(Figure67).
D.Checktheclutchoperation;referto
CheckingtheClutchOperation(page43).
8.Installthedividerplate;refertoInstallingthe
DividerPlate(page27).
CheckingtheClutchOperation
ServiceInterval:Every40hours
Important:Thepaddlesmustnotrotateinan
emptydrumwhentheclutchleverisintheOFF
position.
1.MovetheclutchlevertotheOFFposition.
2.Starttheengine.
3.Ifthepaddlesrotatewiththeclutchlevertothe
OFFpositiondothefollowing:
43