Operator's Manual

g020009
Figure64
1.Enginepulley
5.Idlershaft
2.Idlerpulley6.Jamnut
3.Reductioncase(engine)7.Setscrew
4.Beltguide
8.Straightedge
E.Ifnecessary,pivottheengineontheengine
deckuntiltheenginepulleyandidlerpulley
arealignedtothestraightedge(Figure64).
F.Tightenthenutsandboltsthatsecurethe
enginetotheenginedecktoatorqueof18
N∙m(13ft-lb).
G.Checktheairgapbetweentheenginedeck
andtherollerontheclutch.Iftheairgapis
notwithinthespeciedrange,repeatstep6
untiltheairgapmeasurementiswithinthe
speciedrange.
H.Installthedividerplate;refertoInstalling
theDividerPlate(page27).
Important:Ensurethatthepaddlesdonotrotate
whentheclutchleverisintheOFFposition.
ReplacingtheBelts
ServiceInterval:Every2years(belt-drivemodels
only).
RemovingtheBelts
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowthemachinetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page27).
4.MovetheclutchlevertotheOFFposition.
5.Removethedividerplate;refertoRemovingthe
DividerPlate(page27).
6.Removetheboltthatsecuresthebeltguideto
theengine,andremovethebeltguide(Figure
65).
g020010
Figure65
1.Bolt2.Beltguide
7.Sliptheforwardbeltforwardandofftheidler
pulley(Figure66).
g020012
Figure66
1.Enginepulley3.Idlerpulley
2.Forwardbelt4.Rearbelt
8.Sliptherearbeltrearwardandofftheidlerpulley
(Figure66).
9.Slipthebeltsofftheenginepulley.
10.Removethebeltsfromthemachine.
InstallingtheBelts
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowthemachinetocool.
42