Operator's Manual

g029188
Figure69
1.Wiper4.Paddleblade
2.Distancebetween
paddle-bladeedgeand
wiperedge—3to6mm
(1/8to1/4inch)
5.Carriageboltandanged
locknut
3.Wiperbar
5.Adjustthepositionofthewipersothatthewiper
lightlycontactsthedrumacrossthelengthof
thewiper(Figure70).
g029038
Figure70
1.Wiperlightlycontactingthedrumatthesmallestdistance
betweenthedrumandthewiperofthepaddle
6.Adjustthepositionofthepaddlebladesothat
theouteredgeis3to6mm(1/8to1/4inch)
fromtheouteredgeofthewiper.
7.Torquethecarriageboltsandnutsto19to25
N-m(14to18ft-lb).
8.Repeatsteps4through7fortheotherpaddle
forthatpaddlerow.
9.Repeattheprocedurefortheotherpaddlerows.
AligningtheEnd-PaddleWipers
1.Rotatethewiperandxedpaddlearoundthe
endplateofthedrumandlocatesmallest
distancebetweenthedrumandthewiperofthe
paddle.
2.Marktheinsideoftheendplateatthelocation
thatyoudeterminedinstep1.
g029043
Figure71
1.Carriageboltandanged
locknut
3.Drumendplate
2.Closestpointofcontact
3.Alignthewiperofapaddletothemark.
4.Loosenthecarriageboltsandangedlocknuts
thatsecurethepaddlebladeandwipertothe
xedpaddle.(Figure71)
5.Adjustthepositionofthewipersothatthewiper
lightlycontactstheendplateacrossthelength
ofthewiper.
6.Adjustthepositionofthepaddlebladesothat
theouteredgeofthebaris3to6mm(1/8to1/4
inch)fromtheouteredgeofthewiper.
7.Torquethecarriageboltsandnutsto19to25
N-m(14to18ft-lb).
8.Repeattheprocedureforthewiperattheend
plateontheotherendofthedrum.
44