Operator's Manual

7.Allowthepaddlestomixthematerialuntilthe
ingredientshaveauniformappearance.
Note:Ifneeded,addwaterorplaster,cement,
orotherbindingmaterialuntiltheconsistency
ofthebatchiscorrect.
DumpingtheMaterial
DANGER
Contactwiththemixingpaddlescouldcause
damageorinjury.
Neverputyourhandsinsidethedrumwhile
theengineisrunning.
Note:Whendumpingabatchofmaterial,leave
theengine/motorrunningandtheclutchintheON
positionsothattherotatingpaddleshelpdischarge
thematerial.
1.Alignawheelbarroworsimilarcontainerof
adequatecapacityinthepathofthedrum
opening.
2.Graspthedumphandlewithyourlefthand
(Figure31).
g028574
Figure31
1.Dumphandle—Mix
position
3.Drumlatch—Locked
position
2.Drumlatch—Release
position
4.Dumphandle—Dump
position
3.Liftthehandleofthedrumlatch(Figure31).
4.Withbothhandsonthedumphandle,rotateit
counterclockwisetodischargethecontentsof
thedrum(Figure31).
Note:Allowthemachinetocompletely
dischargethecontentsofthedrum.
5.Rotatethedumphandleclockwiseuntilthe
drumlatchlocksthedrumintheuprightposition
(Figure31).
6.Afterdumpingabatchofmaterial,clean
thedrumtopreventdriedmaterialfrom
contaminatingthenextbatchofmaterial;referto
CleaningtheDrum(page23).
AfterOperation
AfterOperationSafety
GeneralSafety
•Parkthemachineonalevelsurface,shutoffthe
engine,waitforallmovingpartstostop,andallow
themachinetocoolbeforeadjusting,cleaning,
storing,orrepairingthemachine.
•Chockthetiresofthemachineorkeepitattached
tothetowingvehiclewhenitisnotinuse.
•Donottouchpartsthatmaybehotfromoperation.
Allowthemtocoolbeforeattemptingtomaintain,
adjust,orservicethemachine.
CleaningtheDrum
Important:Donotstrikeonthedrumwitha
shovel,hammer,oranyotherdevicetoloosenany
accumulateddriedmaterials.
1.MovetheclutchlevertotheOFFpositiontostop
thepaddles.
2.Shutofftheengine/motor.
3.Ensurethatthedrumisinthemixposition
(upright).
4.Spraythemachinewithwatertoremoveany
accumulatedmaterial.
5.Starttheengine/motor.
6.MovetheclutchlevertotheONpositiontostart
thepaddles.
7.Dumpthedrum.
23