Operator's Manual

g019331
Figure48
Model60221HDshown
1.Deector(if
applicable)
5.Exhaustpipe
9.Sparkarrester
2.Protector
6.Nut(8mm)10.Screws(5mm)
3.Screw(6mm)7.Gasket
11.Exhaustport
4.Mufer8.Bolt(8mm)12.Screw(4mm)
6.Removethe3screws(4mm)fromtheexhaust
deector,andremovethedeector(Figure48).
7.Removethescrews(5mmand6mm)from
themuferprotector,andremovethemufer
protector(Figure48).
8.Removethescrews(4mm)fromthespark
arrester,andremovethesparkarresterfromthe
mufer(Figure48).
9.Useabrushtocarefullyremovecarbondeposits
fromthespark-arresterscreen(Figure49).
Note:Replacethesparkarresterifithas
breaksorholes.
g208746
Figure49
1.Screen
2.Brush
10.Installthesparkarrester,muferprotector,
exhaustdeector,andmuferinthereverse
orderofdisassembly.
11.Installthedividerplate(ifequipped);referto
InstallingtheDividerPlate(page29).
RemovingandInstalling
theEngine
RemovingtheEngine
WARNING
Thespringisundertensionwheninstalled
andcancausepersonalinjury.
Becarefulwhenremovingthespring.
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowtheenginetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page29).
4.Removethedividerplate;refertoRemovingthe
DividerPlate(page29).
5.Removethebeltguide;refertoRemovingthe
Belts(page44).
6.Removethebelts;refertoRemovingtheBelts
(page44).
7.Usingaspring-removaltool(T oroPartNo.
92-5771),removethespringfromtheanchor
bracketontheenginedeck(Figure50).
Note:Leavetheotherendofthespring
attachedtotheframeofthemachine.
g020119
Figure50
1.Anchorbracket
4.Spring-removaltool
(springremoved)
2.Enginedeck
5.Spring(springremoved)
3.Spring-removaltool(Toro
PartNo.92-5771)
36