Operator's Manual

3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page29).
4.EnsurethattheclutchleverisintheOFF
position.
5.Aligntherearbelttothereargrooveinthe
enginepulley.
Note:Donotaligntherearbelttotheidler
pulley.
6.Aligntheforwardbelttotheforwardgrooveof
theidlerpulley.
7.Sliptherearbeltovertheidlerpulleyandalign
thebelttotherearpulleygroove.
8.Sliptheforwardbeltovertheenginepulleyand
alignthebelttotheforwardpulleygroove.
9.Checkthebelttension;refertostep4through6
inAdjustingtheBeltTension(page43).
10.Looselysecurethebeltguidetotheengine
(Figure68)withtheboltthatwasremovedin
step6ofRemovingtheBelts(page44).
11.Adjustthebeltguide;refertoAdjustingtheBelt
Guide(page45).
12.Installthedividerplate;refertoInstallingthe
DividerPlate(page29).
AdjustingtheBeltGuide
Note:T oaccessthebeltguide,removethedivider
plate;refertoRemovingtheDividerPlate(page29).
Guideairgap:2.5to4.0mm(3/32to5/32inch)
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowthemachinetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page29).
4.EnsurethattheclutchleverisintheONposition.
5.Ensurethatthebelttensioniscorrect;referto
AdjustingtheBeltT ension(page43).
6.Checkthattheairgapbetweenthebeltguide
andthebeltsis2.5to4.0mm(3/32to5/32
inch);refertoFigure70.
g020011
Figure70
1.Enginepulleys4.Beltguide
2.Belts5.Bolt
3.Guideairgap:2.5to4.0
mm(3/32to5/32inch)
7.Iftheairgapisnotwithinthespeciedrange,
dothefollowing:
A.Loosentheboltthatsecuresthebeltguide
totheengine(Figure70).
Important:Ensurethatthebeltguideis
towardtheenginepulley.
B.Rotatethebeltguideupordownuntilthere
isanairgapof2.5to4.0mm(3/32to5/32
inch)betweentheguideandeachbelt
(Figure70).
Important:Thebeltguideshouldnot
contactthebeltswiththeclutchleverin
theONposition.
Note:Iftheairgapbetweenthebeltguide
andbothbeltscannotbeattained,then1of
thebeltsistoolong.
C.Tightentheboltthatsecuresthebeltguide
totheengine(Figure70).
D.Checktheclutchoperation;referto
CheckingtheClutchOperation(page45).
8.Installthedividerplate;refertoInstallingthe
DividerPlate(page29).
CheckingtheClutchOperation
ServiceInterval:Every40hours
Important:Thepaddlesmustnotrotateinan
emptydrumwhentheclutchleverisintheOFF
position.
1.MovetheclutchlevertotheOFFposition.
2.Starttheengine.
3.Ifthepaddlesrotatewiththeclutchlevertothe
OFFpositiondothefollowing:
45