Operator's Manual

Figure45
1.Wiper4.Paddleblade
2.Distancebetween
paddle-bladeedgeand
wiperedge—3to6mm
(1/8to1/4inch)
5.Carriageboltandanged
locknut
3.Wiperbar
5.Adjustthepositionofthewipersothatthewiper
lightlycontactsthedrumacrossthelengthofthewiper
(Figure46).
Figure46
1.Wiperlightlycontactingthedrumatthesmallestdistance
betweenthedrumandthewiperofthepaddle
6.Adjustthepositionofthepaddlebladesothatthe
outeredgeis3to6mm(1/8to1/4inch)fromthe
outeredgeofthewiper.
7.Torquethecarriageboltsandnutsto19to25N-m
(14to18ft-lb).
8.Repeatsteps4through7fortheotherpaddleforthat
paddlerow .
9.Repeattheprocedurefortheotherpaddlerows.
AligningtheEndPaddleWipers
1.Rotatethewiperandxedpaddlearoundtheendplate
ofthedrumandlocatesmallestdistancebetweenthe
drumandthewiperofthepaddle.
2.Marktheinsideoftheendplateatthelocationthatyou
determinedinstep1.
Figure47
1.Carriageboltandanged
locknut
3.Drumendplate
2.Closestpointofcontact
3.Alignthewiperofapaddletothemark.
4.Loosenthecarriageboltsandangedlocknutsthat
securethepaddlebladeandwipertothexedpaddle.
(Figure47)
5.Adjustthepositionofthewipersothatthewiperlightly
contactstheendplateacrossthelengthofthewiper.
6.Adjustthepositionofthepaddlebladesothatthe
outeredgeofthebaris3to6mm(1/8to1/4inch)
fromtheouteredgeofthewiper.
7.Torquethecarriageboltsandnutsto19to25N-m
(14to18ft-lb).
8.Repeattheprocedureforthewiperattheendplateon
theotherendofthedrum.
30