Operator's Manual

BeltMaintenance
ServicingtheBelts
InspectingtheBelts
ServiceInterval:Aftertherst25hours—Inspectthebelts
andadjustasnecessary.
Every40hours—Inspectthebeltsandadjustas
necessary.
1.Removethedividerplate;refertoRemovingthe
DividerPlate(page22).
2.MovetheclutchlevertotheOFFposition;referto
ControllingthePaddles(page19).
3.Examinethebeltsforwearordamage.Ifthebeltsare
wornordamaged,replacethem;refertoReplacingthe
Belts(page27).
4.Examinethepulleysforwear,damage,and
misalignment;refertoAligningthePulleys(page29).
5.Installthedividerplate;refertoInstallingtheDivider
Plate(page23).
AdjustingtheBeltTension
Clutchairgap:2.5to6.5mm(3/32to1/4inch)
1.MovetheclutchlevertotheONposition;referto
ControllingthePaddles(page19).
2.Measuretheairgapbetweenthemotordeckandthe
rollerontheclutch(Figure38).
G019976
1
2
3
Figure38
1.Motordeck
3.Clutchairgap:2.5to6.5
mm(3/32to1/4inch)
2.Clutchroller
3.Ifthemeasuredairgapisnotwithinthespecied
range,adjustthegapasfollows:
A.MovetheclutchlevertotheOFFposition;refer
toControllingthePaddles(page19).
B.Loosenthenutsandboltsthatsecurethemotor
tothemotordeck(Figure39).
1
1
g020662
Figure39
1.Nutandbolt
C.Movethemotorpositionasfollows:
•Increasetheairgap—movethemotoraway
fromtheidlerpulley(Figure39).
•Decreasetheairgap—movethemotor
towardtheidlerpulley(Figure39).
D.Alignastraightedgeacrossthemotorpulleyand
theidlerpulley(Figure40).
26