Operator's Manual

Note:Donotremovetheforwardhingebracket.
g020121
Figure51
11.Removetheengineandenginedeckfromthe
machine(Figure51).
InstallingtheEngine
1.Aligntheengineandenginedecktotherear
frameofthemachine.
Note:Thedrivepulleyontheenginemustalign
forward.
2.Alignthepivotontheenginedeckwiththe
forwardhingebracket(Figure51).
3.Slidetheenginedeckforwardandthepivotinto
theforwardhingebracket(Figure51).
4.Aligntherearhingebracketwiththepivotonthe
engine-deckhinge(Figure51).
5.Liftupontherearedgeoftheenginedeckand
slipthehingebracketontothepivot.
6.Securetherearbrackettotheframeofthe
machineusingtheboltandnut(Figure50)
removedinstep8ofRemovingtheEngine
(page34).
7.Usingaspring-removaltool(T oroPartNo.
92-5771),installthetensionspringtotheanchor
bracketontheenginedeck(Figure49).
8.Installthebeltsandbeltguide;refertoInstalling
theBelts(page41).
9.Adjustthebeltguide;refertoAdjustingtheBelt
Guide(page42).
10.Installthedividerplate;refertoInstallingthe
DividerPlate(page26).
FuelSystem
Maintenance
CleaningtheFuel-Sediment
Cup
ServiceInterval:Every100hours/Every6months
(whichevercomesrst)—Cleanthe
fuel-sedimentcup.
Yearlyorbeforestorage—Cleanthe
fuel-sedimentcup.
Underneaththefuelvalveisasedimentcuptocatch
dirtinthefuel.
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowtheenginetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page25).
4.MovetheleverofthefuelvalvetotheOFF
position,allthewaytotheleft(Figure52).
5.Unscrewthefuel-sedimentcup(Figure52).
6.RemoveandretainthefuellterandO-ring
(Figure52).
Note:DonotcleantheO-ringinsolvent.
g019333
Figure52
1.Fuelvalve—OFFposition3.Fuellter
2.O-ring
4.Fuel-sedimentcup
7.Cleanthefuellterandsedimentcupusinga
nonammablesolvent,anddryitcarefully.
8.WipetheO-ringwithaclean,drycloth.
9.Installthefuellterinthebottomofthe
carburetor(Figure52).
35