Operator's Manual

g019976
Figure61
1.Enginedeck
3.Clutchairgap:2.5to6.5
mm(3/32to1/4inch)
2.Clutchroller
6.Ifthemeasuredairgapisnotwithinthespecied
range,adjustthegapasfollows:
A.MovetheclutchlevertotheOFFposition.
B.Loosenthenutsandboltsthatsecurethe
enginetotheenginedeck(Figure62).
g020006
Figure62
1.Idlerpulley3.Nutandbolt
2.Setscrew
4.Enginedeck
C.Movetheenginepositionasfollows:
•Increasetheairgap—movetheengine
awayfromtheidlerpulley(Figure62).
•Decreasetheairgap—movethe
enginetowardtheidlerpulley(Figure
62).
D.Alignastraightedgeacrosstheengine
pulleyandtheidlerpulley(Figure63).
g020009
Figure63
1.Enginepulley
5.Idlershaft
2.Idlerpulley6.Jamnut
3.Reductioncase(engine)7.Setscrew
4.Beltguide
8.Straightedge
E.Ifnecessary,pivottheengineontheengine
deckuntiltheenginepulleyandidlerpulley
arealignedtothestraightedge(Figure63).
F.Tightenthenutsandboltsthatsecurethe
enginetotheenginedecktoatorqueof18
N∙m(13ft-lb).
G.Checktheairgapbetweentheenginedeck
andtherollerontheclutch.Iftheairgapis
notwithinthespeciedrange,repeatstep6
untiltheairgapmeasurementiswithinthe
speciedrange.
H.Installthedividerplate;refertoInstalling
theDividerPlate(page26).
Important:Ensurethatthepaddlesdonotrotate
whentheclutchleverisintheOFFposition.
40