Operator's Manual

g020009
Figure62
1.Enginepulley
5.Idlershaft
2.Idlerpulley6.Jamnut
3.Reductioncase(engine)7.Setscrew
4.Beltguide
8.Straightedge
E.Ifnecessary,pivottheengineontheengine
deckuntiltheenginepulleyandidlerpulley
arealignedtothestraightedge(Figure62).
F.Tightenthenutsandboltsthatsecurethe
enginetotheenginedecktoatorqueof18
N∙m(13ft-lb).
G.Checktheairgapbetweentheenginedeck
andtherollerontheclutch.Iftheairgapis
notwithinthespeciedrange,repeatstep6
untiltheairgapmeasurementiswithinthe
speciedrange.
H.Installthedividerplate;refertoInstalling
theDividerPlate(page28).
Important:Ensurethatthepaddlesdonotrotate
whentheclutchleverisintheOFFposition.
ReplacingtheBelts
ServiceInterval:Every2years(belt-drivemodels
only).
RemovingtheBelts
1.Parkthemachineonalevelsurfaceandshut
offtheengine.
2.Allowthemachinetocool.
3.Disconnectthewirefromthesparkplug;referto
DisconnectingtheSpark-PlugWire(page28).
4.MovetheclutchlevertotheOFFposition.
5.Removethedividerplate;refertoRemovingthe
DividerPlate(page28).
6.Removetheboltthatsecuresthebeltguideto
theengine,andremovethebeltguide(Figure
63).
g020010
Figure63
1.Bolt2.Beltguide
7.Sliptheforwardbeltforwardandofftheidler
pulley(Figure64).
42