Operator's Manual

Installation

Installing the Spark Plug

Protector

Fasten the spark plug protector to the engine using

the self-tapping screws provided with the engine

(Fig 2).

Figure 5

1. Self-tapping Screw (2)

2. Muffler Guard Extension

(European requirement

only)

3. Spark Plug Protector

Kill Switch Wire

Connect the kill switch wire to the equipment

according to the equipment manufacturer’s

instructions.

Fuel Line

You may have to cut the fuel line to fit your particular

application.

For European Applications

• A muffler guard extension is attached to the

muffler. This is a European safety requirement

and is not necessary for USA applications

(Fig. 2).

• A fuel decal is provided to be affixed over the

existing fuel decal. USA purchasers may discard

this decal.