Operator's Manual

g021177
Figure25
Side-DumpModels
1.Connectinglinks3.Chaincrossedundertow
pole
2.Keyholesinfrontpost
g019928
Figure26
End-DumpModels
1.Connectinglinks3.Chaincrossedunder
tongue
2.Keyholes
4.Chain
3.Connecteachlengthofchaintothesafety
chainmountingpointonthetowvehiclewiththe
connectinglinks(Figure27).
Important:Ensurethatthechainhas
enoughslackforturningaroundcorners
whentowingthemachine.
Note:Forside-dumpmodels,stowtheexcess
chaininsidethebottomofthefrontpostby
pushingitintothekeyholesandlatchingthe
appropriatelinksintothekeyholeslots.
Note:Forend-dumpmodels,connectthe
connectinglinkstotheappropriatelinksinthe
safetychain(Figure27).Iftheexcesschain
hangstoolowandtouchestheground,connect
itagaintotheconnectinglinktoraiseitaway
fromtheground.
g019927
Figure27
1.Connectinglink3.Chainlink
2.Safetychainmounting
pointontowvehicle
4.Chain
ConnectingandCheckingthe
Lights
MachinesEquippedwithaLightKitOnly
1.Connecttheelectricalplugofthemachinewith
theelectricalplugofthetowvehicle(Figure28).
g020828
Figure28
Note:Themachineusesastandard4-pin,at
plug.Ifyourtowvehiclehasadifferenttype
ofplug,obtainanadapterfromanautomotive
partsstorebeforetowing.
2.EnsurethatthetowvehicleisintheNEUTRAL
position,engagetheparkingbrake,andstart
theengine.
3.Testthelightsasfollows:
A.Turnontheheadlightsofthetowvehicle.
Thetaillightsofthemachineshould
illuminate.
B.Pressthebrakepedalofthetowvehicle.
Thebrakelightsofthemachineshould
illuminate.
20