Operator's Manual

7.Removethescrews(5mmand6mm)from
themuferprotector,andremovethemufer
protector(Figure49).
8.Removethescrews(4mm)fromthespark
arrester,andremovethesparkarresterfromthe
mufer(Figure49).
9.Useabrushtocarefullyremovecarbondeposits
fromthespark-arresterscreen(Figure50).
Note:Replacethesparkarresterifithas
breaksorholes.
g208746
Figure50
1.Screen
2.Brush
10.Installthesparkarrester,muferprotector,
exhaustdeector,andmuferinthereverse
orderofdisassembly.
11.Installthedividerplate(ifequipped);referto
InstallingtheDividerPlate(page29).
DriveSystem
Maintenance
TireAirPressure
Thefollowingtableshowstheappropriateairpressure
forthetiresasinstalledatthefactory.
Important:Alwayschecktheinformationon
theactualtiresforthecorrectairpressure
requirement.
ModelMaximumAirPressure
68004
414kPa(60psi)
68006,68007,68008,68009,
and68011
241kPa(35psi)
InspectingtheTires
ServiceInterval:Beforeeachuseordaily
WARNING
Failuretomaintaincorrecttirepressure
mayresultintirefailureandlossofcontrol,
resultinginpropertydamageandserious
injuryordeath.
•Checkthetirepressurefrequentlyto
ensureproperination.Ifthetiresarenot
inatedtothecorrectpressure,theywill
wearprematurely.
•Inspectthetireconditionbeforetowing
andafteranyoperatingaccident.
TheDOTtireinformationislocatedonthesideof
eachtire.Thisinformationgivesloadandspeed
ratings.Replacementtiresshouldhavethesameor
betterratings
Note:Ensurethatanytiresinstalledonyourmachine
meetorexceedtheweightrequirementsofyour
machineaslistedinSpecications(page15).
1.Visuallyinspectthetiresfordamageandwear
(Figure51andFigure52).
35