Operator's Manual

•Formodels68007Cand68008C,lowerthefrontandrear
stabilizerlegs.
•Checkthefuelandoillevelsoftheengine.
•Whenpreparingtomixmaterial:
1.Movethemachinetoaleveljob-sitesurface.
2.Removethemachinefromthetowvehicle.
3.Chockthefrontandbackofthetirestoprevent
themachinefrommoving.
4.Ensurethatthedrumisinthemixposition
(upright).
5.Ensurethatthedrumlatchisengagedandthatthe
drumdoesnotrotatetowardthedumpposition.
LoweringtheStabilizerLegs
Models68007Cand68008Conly
Models68007Cand68008Chaveafrontstabilizerlegand2
rearstabilizerlegstokeepthemachinefromtippingforward
orbackwardduringoperation.Movethestabilizerlegsinto
theloweredpositionbeforeoperatingthemachine.
1.Pulltheclevispinoutfromtherearstabilizerlegand
thebracket(Figure30).
G019918
Figure30
2.Slidethestabilizerlegdowninthebracketandalign
thepinholeofthebracketwiththeupperholeinthe
stabilizerleg(Figure30).
3.Pushtheclevispinthroughtheholeinthebracketand
thestabilizerleg(Figure30).
4.Repeatsteps1through3fortheotherrearstabilizer
leg.
5.Liftupwardonthetonguetoprovideclearanceforthe
frontstabilizerleg.
6.Pulltheclevispinoutfromthefrontstabilizerlegand
thetongue(Figure31).
G019916
1
2
3
Figure31
1.Removetheclevispin.3.Installtheclevispin.
2.Rotatethestabilizerleg
down.
7.Rotatethefrontstabilizerlegdowntowardtheground
(Figure31).
8.Pushtheclevispinthroughthefrontholeinthetongue
andthefrontstabilizerleg(Figure31),andcarefully
lowerthemachinetotheground.
OpeningandClosingtheCowl
OpeningtheCowl
1.Atthesideofthemachinewherethefrontcowland
rearcowlmeet,grasptheringofthelatchandpullit
offfromthelatchanchorontherearcowl(Figure32).
20