Operator's Manual

Chapter 1
Introduction
Intended Use
This machine is intended to be used by professional, hired operators on indoor and outdoor
improved surfaces in commercial applications. It is primarily designed to move concrete,
mortar, gravel, dirt, or debris around job sites. Using this product for purposes other than its
intended use could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate and maintain your product properly
and to avoid injury and product damage. You are responsible for operating the product
properly and safely.
Getting Help
G387213
Visit www.Toro.com for product safety and
operation training materials, accessory
information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts,
or additional information, contact an Authorized
Service Dealer or Toro Customer Service and have
the model and serial numbers of your product ready. These numbers are located on the
serial plate on your product
. Write the numbers in the space provided.
IMPORTANT
With your mobile device, you can scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other product information.
Model
Number:
Serial
Number:
3440-398 A Page 1–1 Introduction