Operator's Manual

G019226
1
2
3
Figure20
PointerAlignment(Model68045)
1.Pointer
3.Saw-bladecore
2.Mason’sline
•Model68046—Alignthefrontpointerbydoing
thefollowing:
A.Loosenthumbscrewthatsecurestheforward
pointertothepointerfork(
Figure21).
G019228
1
2
3
4
5
6
Figure21
ForwardPointerAlignment(Model68046)
1.Pointerfork4.3–6mm(1/8–1/4inch)
2.Thumbscrew5.Masonline
3.Forwardpointer
6.Saw-bladecore
B.Slidethepointerleftorrighttoalignit
withthemasonline,andelevated3–6mm
(1/8–1/4inch)abovethejobsitesurface
(Figure21).
C.Tightenthethumbscrewthatsecures
theforwardpointertothepointerfork
(Figure21).
AligningtheRearPointer(Model68046)
Note:Therearpointeralignmentprocedurerequiresa3m
(10ft)minimumlengthofchalkline.
Note:Alignthefrontpointerbeforealigningtherear
pointer;refertoAligningtheFrontPointer(page15).
1.Marka3m(10ft)orlongerlineonthejobsitesurface
bysnappingachalklineonthesurface(
Figure22).
G019231
1
2
3
4
6
7
5
Figure22
RearPointerAlignment(Model68046)
1.Forwardpointer
5.3–6mm(1/8–1/4inch)
2.Sawblade
6.Thumbscrew
3.Rearpointer
7.Console
4.Chalkline
2.Alignthesawbladeandtheforwardpointertotheline
markingthejobsitesurface(
Figure22).
3.Atthebackoftheconsole,loosenthumbscrewthat
securesthepointertothebackofthebaseandrotate
thepointerdown(Figure22).
4.Slidethepointerleftorrighttoalignittotheline
markingthejobsitesurface,andelevatethepointer3–6
mm(1/8–1/4inch)abovethesitesurface(Figure22).
5.Tightenthethumbscrewthatsecuresthepointerto
baseofthemachine(Figure22).
AddingFuel
•Forbestresults,useonlyclean,fresh,unleadedgasoline
withanoctaneratingof87orhigher((R+M)/2rating
method).
•Oxygenatedfuelwithupto10%ethanolor15%MTBE
byvolumeisacceptable.
•DoNotuseethanolblendsofgasoline(suchasE15
orE85)withmorethan10%ethanolbyvolume.
Performanceproblemsand/orenginedamagemayresult
whichmaynotbecoveredunderwarranty.
•DoNotusegasolinecontainingmethanol.
•DoNotstorefueleitherinthefueltankorfuelcontainers
overthewinterunlessafuelstabilizerisused.
•DoNotaddoiltogasoline.
16