Operator's Manual

tensionontheclutchcable.Shutofftheengineand
repeatstep7untilthebladesdonotrotatewhenthe
engineisrunningandtheDyna-ClutchisintheStop
position.
AdjustingtheBeltGuide
1.PlacetheDyna-ClutchleverintheRunposition.
2.Measuretheairgapbetweenthebeltandthebeltguide
(Figure26).
Figure26
1.6mm(1/4inch)
measures-airgap
3.Beltguide
2.Belt4.
Theairgapshouldbeapproximately6mm(1/4inch).Ifan
adjustmentneedstobedone,performthefollowing:
1.Loosenthehex-angeheadboltthatsecuresthebelt
guidetotheengineplate(Figure26).
2.Whilekeepingthetopofthebeltguideparalleltothe
belt,movethebeltguidetowardorawayfromthebelt
untiltheairgapiscorrect(Figure26).
3.Tightenthehex-angeheadboltthatsecuresthebelt
guidetotheengineplate(Figure26).
ControlsSystem
Maintenance
AdjustingtheTiltKnob
1.SettheDyna-ClutchlevertotheStopposition,stop
theengine,andwaitforallmovingpartstostop.
2.Disconnectthewirefromthesparkplug.
3.Attachanoverheadlifttotheliftingpointonthe
machineandliftitoffoftheground.
4.Turnthetiltknobuntilthereisenoughcableslackto
accessthetiltlocknut(
Figure27).
Figure27
1.Tiltknob6.Nut
2.Bearing7.Tiltblock
3.Tiltrod8.Tiltcable
4.Tiltlocknut
9.Setscrew
5.Washer
5.Tightenthelocknutagainstthebearingthenloosenit
slightly.Setitwiththesetscrew(Figure27).
6.Adjustthenutsinsidethetiltblocktotakeupanycable
slack.
Note:Replacethecablesiffulltiltisnolongerobtainable.
20