Operator's Manual

6.Movethethrottlelevertodesiredsetting.
StoppingtheEngine
1.Turntheengineswitchandfuelvalveoff.
2.Waitforallmovingpartstostopbeforeproceeding.
OperatingtheMachine
Important:Usethemachineonconcretethathasnot
setcompletely,butensurethattheconcretehasset
enoughtosupporttheweightofthemachine.
1.Starttheengine.
2.Aftertheenginehaswarmedup,adjustthethrottleto
approximatelyhalfspeed.
3.Adjustthebladestothedesiredposition.
•Foroating,setthebladesat,butwithsome
tensiononthecable.
•Fornishing,setthepitchofthebladesto
approximately6to9mm(1/4to3/8inches),or
approximately5to10degrees.Startwith
4.Holdthehandlermlywith1hand,andmovethe
Dyna-ClutchlevertotheOnpositiontostartthe
movementoftheblades.
5.Guidethetrowelovertheconcreteinacircular
back-and-forthmotion.
Note:Ifthebladesstarttodigintotheconcrete
decreasetheamountofthepitch.
6.SettheDyna-ClutchlevertotheOffposition,waitfor
anymovingpartstostopmoving,andstoptheengine;
referto
StoppingtheEngine(page12).
12