Operator's Manual

InstallingandRemovingthe
ScreedBoards
Note:Usestraight5cmx15to20cm(2inchx6to8inch)
boardsor2-inchthickcontouredmaterial.
Maximumscreedboardwidths:
•Model68052—457cm(15ft)
•Model68053—914cm(30ft)
InstallingtheScreedBoardstothe
Machine
1.Placethemachineonalevel,atsurface.
2.Raisethefrontofthemachine10to12inches,
andaligntheforwardscreedboardtotheforward
U-channeloftheframe(Figure18).
Note:ThefrontU-channelislocatedadjacenttothe
eccentriccover.
G020865
5
8
9
5
1
3
4
7
2
6
Figure18
1.U-channel(rightspreader)
6.Rearscreedboard
2.Eccentricguard7.U-channel
3.U-channel(frame)
8.Wingnut
4.U-channel(leftspreader)
9.L-bolt
5.Forwardscreedboard
3.AlignthescreedboardtotheU-channelandcenterthe
boardthemachine(Figure18).
4.LightlytightentheL-boltsintheforwardU-channel
(Figure18).
5.Raisetherearofthemachine10to12inches,and
aligntherearscreedboardtotherearU-channelof
theframe(Figure18).
6.AlignthescreedboardtotheU-channel,andcenter
theboardtothemachine(Figure18).
7.Securethescreedboardtothemachinebytightening
alltheL-boltsandwingnuts(Figure18).
InstallingtheSpreaders
SpreaderPositionTable
Screed
board
length
457cm
(15ft)
610cm
(20ft)
762cm
(25ft)
914cm
(30ft)
Spreader
position
(fromthe
endofthe
screed
board)
61cm
(2ft)
91cm
(3ft)
122cm
(4ft)
152cm
(5ft)
1.UsingtheSpreaderPositionTable,locateandmarkthe
positionsofthespreadersonbothendsofthescreed
board.
2.Alignchannelsofthespreadertothescreedboards
andseatthespreaderontotheboards(Figure18).
3.Slidethespreaderalongtheboardsuntiltheoutside
edgeofthespreaderisalignedwiththemarkonthe
boardcreatedinstep1.
4.Securethespreadertothescreedboardswiththe
L-boltsandwingnuts(Figure18).
5.Attachthespreadertotheotherendofthescreed
boardbyrepeatingsteps2,3,and4.
RemovingtheSpreadersandScreed
Boards
1.Placethemachineonalevel,atsurface.
2.LoosenthewingnutsandL-boltsthatsecurethe
spreaderstothescreedboards,andremovethe
spreaders(Figure18).
3.Raisetherearofthemachine10to12inches,and
removetherearscreedboardfromtherearU-channel
oftheframe(Figure18).
4.LoosenthewingnutsandL-boltsthatsecuretherear
screedboardtotherearU-channeloftheframe,and
removethescreedboard(Figure18).
5.Raisethefrontofthemachine10to12inches,and
removetheforwardscreedboardfromtheforward
U-channeloftheframe(Figure18).
6.LoosenthewingnutsandL-boltsthatsecurethe
forwardscreedboardtotheforwardU-channelofthe
frame,andremovethescreedboard(Figure18).
7.Carefullylowerthemachine.
14