Operator's Manual
Figure24
1.Positivebatterypost
3.Red(+)chargerlead
2.Negativebatterypost
4.Black(-)chargerlead
Ifthebatterynolongerholdsacharge,replaceit;referto
ReplacingtheBattery(page18).
ReplacingtheBattery
1.Removethecoverofthebatterybox.
2.Disconnectthenegative(black)groundcablefromthe
batterypost.
WARNING
Incorrectbatterycableroutingcoulddamage
themachineandcables,causingsparks.
Sparkscancausethebatterygasestoexplode,
resultinginpersonalinjury.
•Alwaysdisconnectthenegative(black)
batterycablebeforedisconnectingthe
positive(red)cable.
•Alwaysconnectthepositive(red)battery
cablebeforeconnectingthenegative
(black)cable.
WARNING
Batteryterminalsormetaltoolscouldshort
againstmetalmachinecomponents,causing
sparks.Sparkscancausethebatterygasesto
explode,resultinginpersonalinjury.
•Whenremovingorinstallingthebattery,
donotallowthebatteryterminalstotouch
anymetalpartsofthemachine.
•Donotallowmetaltoolstoshortbetween
thebatteryterminalsandmetalpartsof
themachine.
3.Removethepositive(red)batterycable.
4.Removethebattery.
Note:Recycletheoldbatteryatanauthorizedfacility.
5.Placethenewbatteryinthetray.
6.Installthepositive(red)batterycabletothepositive
(+)batteryterminal,andtightenthenutontothebolt.
7.Installthenegative(black)groundcabletothenegative
(-)batteryterminal,andtightenthenutontothebolt.
8.Installthecoverofthebatterybox,andsecureitwith
thestrap.
ServicingtheBelt
CheckingtheBeltTension
1.Removetheboltsholdingthebeltcoverinplace
(Figure25).
Figure25
1.Bolts
2.Apply2kg(4.4lb)ofpressuretothemiddleofthebelt.
Note:Whenthebeltistensionedcorrectly,itshould
deectapproximately0.5cm(0.2inches).
3.Ifthebeltisnottensionedproperly,refertoAdjusting
theBeltTension(page18).
AdjustingtheBeltTension
ServiceInterval:Every500hours
1.Removetheboltsholdingthebeltcoverinplace
(
Figure25).
2.Loosentheenginemountingbolts.
3.Adjustthepositionoftheengineuntilyouobtainthe
belttensionspeciedin2ofCheckingtheBeltTension
(page18).
4.Tightentheenginemountingboltsandreplacethebelt
cover.
18