Operator's Manual

g203616
Figure45
1.Expansion-tankcap
3.Fluidatllline
2.Sightwindow
5.Iftheoillevelislow,removethecaplockand
capfromthetopoftheexpansiontank(Figure
46),andaddenoughofthespeciedhydraulic
uidtoraiseittotheproperlevel.
g186038
Figure46
1.Bolt
3.Cap
2.Caplock
6.Installthecapandcaplock.Wipeupanyspilled
hydraulicuid.
ChangingtheHydraulicFluidand
FilterfortheDriveSystem
ServiceInterval:Every300hours
1.Parkthemachineonalevelsurface,move
themotion-controlleverstotheNEUTRAL-LOCK
position,engagetheparkingbrake,andlower
thehopper.
2.Shutofftheengine,andremovethekey.Allow
theenginetocool.
3.Lowerthecushionandremovethefueltank;
refertoRemovingtheFuelTank(page24).
4.Removethe6bolts(2rear,4side)fromtheskid
plateandremovetheskidplate(Figure47).
g203662
Figure47
1.Rearbolt(2)3.Sidebolt(4)
2.Skidplate
5.Locatethedrainpluginthebottomofeach
transmission,thenplaceadrainpanunderthe
plugs(Figure48).
g203515
Figure48
1.Hydrauliclter
2.Drainplug
6.Removethedrainplugsandallowthehydraulic
uidtofullydrainfromthemachine.
7.Removethehydraulic-ltercapandhydraulic
lterfromeachtransmission(Figure48).
8.Installanewhydrauliclterwiththespringside
facingoutandthehydraulic-ltercapforeach
transmission.T orqueto13to15N∙m(115to
135in-lb).
9.Installthedrainplugs.
10.Loosentheventplugineachtransmissionuntil
loose(Figure49).
Note:Thisallowsairtoescapethehydraulic
systemasyouaddhydraulicuid.
32