Operator's Manual

ReplacingtheHydraulicFilterfor
theLiftSystem
ServiceInterval:Every300hours
Important:Donotsubstituteanautomotiveoil
lterorseverehydraulicsystemdamagemay
result.
1.Parkthemachineonalevelsurface,move
themotion-controlleverstotheNEUTRAL-LOCK
position,engagetheparkingbrake,raisethe
hopper,andinstallthecylinderlock.
2.Shutofftheengine,andremovethekey.Allow
theenginetocool.
3.ReplacethelterasshowninFigure54.
g186042
g027477
Figure54
4.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.
5.Shutofftheengineandcheckforleaks.
6.Checktheuidlevelinthereservoirtank,refer
toCheckingtheHydraulic-FluidLevelfortheLift
System(page36).
Note:Donotoverllthereservoirtank.
7.Removethecylinderlockandlowerthehopper.
CheckingtheHydraulic
Lines
ServiceInterval:Every40hours—Checkthe
hydrauliclinesforleaks,loose
ttings,kinkedlines,loosemounting
supports,wear,anddeterioration.
(Makenecessaryrepairsbefore
operating.)
WARNING
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.Fluidinjected
intotheskinmustbesurgicallyremoved
withinafewhoursbyadoctorfamiliarwith
thisformofinjury;otherwise,gangrenemay
result.
•Keepyourbodyandhandsawayfrom
pinholeleaksornozzlesthateject
high-pressurehydraulicuid.
•Usecardboardorpapertondhydraulic
leaks;neveruseyourhands.
38