Operator's Manual

g185888
g019614
Figure52
1.Hex2.Fillercap
4.Lookinsidethetanktochecktheuidlevel.
Note:Ifthemachineiscool,theuidshouldbe
attheCOLDlevel;ifthemachineishot,theuid
shouldbeattheHOTlevel.
g189403
Figure53
1.HOTlevel2.COLDlevel
5.Fillthetankwithhydraulicuidonlyuptothe
COLDlevel.
6.Installthellcap.Wipeupanyspilledhydraulic
uid.
7.Removethecylinderlockandlowerthehopper.
ChangingtheHydraulicFluidfor
theLiftSystem
ServiceInterval:Every300hours
1.Parkthemachineonalevelsurface,move
themotion-controlleverstotheNEUTRAL-LOCK
position,engagetheparkingbrake,raisethe
hopper,andinstallthecylinderlock.
2.Shutoffthemachineandremovethekey.Allow
themachinetocoolcompletely.
3.Removethellercapfromthereservoirtank
(Figure52).
CAUTION
Thehydraulicbreather/llercapis
designedtopressurizethereservoirto
34kPa(5psi).
Loosenthecapslowlytoavoidinjury
wheneveraddingoilorworkingonthe
hydraulicsystem.Useawrenchonthe
hexdirectlyunderthecap.
4.Placealargedrainpanunderthettingsatthe
bottomofthereservoirtank.
5.Disconnectahosettingandallowtheuidto
drainintothepan.
6.Whennished,installandtightenthetting.
Note:Disposeoftheuseduidatacertied
recyclingcenter.
7.Fillthereservoirtankwithapproximately2.2L
(74oz)andinstallthellercap.
8.Removethecylinderlock.
9.Starttheengine.Raiseandlowerthehopper3
timestollthecylinderandhoseswithuid.
10.Raisethehopperandinstallthecylinderlock.
11.Shutofftheengine.
12.Add0.60L(20oz)ofhydraulicuidandinstall
thellercap.
Note:TheuidlevelshouldbeattheColdll
line.Donotllpastthisline.
13.Removethecylinderlock.
14.Starttheengine.Raiseandlowerthehopper
severaltimestoremoveairfromthesystem.
37