Setup Instructions

FormNo.3413-455RevA
MBTX2500TrackedMudBuggy
ModelNo.68138—SerialNo.400000000andUp
ModelNo.68138G—SerialNo.400000000andUp
SetupInstructions
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Tensioningtool1Adjustthetracktension.
AdjustingtheTrackTension
Note:Checkandadjustthetensionpriortooperatingthe
machine.
1.Placethetabofthetensioningtoolalongtherearedge
ofthetensionnut.Verifythattheotherendofthe
tensioningtoolalignswiththeedgeofthetension
arm.Ifnecessary,continuetheproceduretoadjust
thetension.
g202806
Figure1
LeftTrackShown
1.Tensionnut
5.Spacer
2.Tensioningtool6.Nut
3.Tensioningbolt7.Tab
4.Bolt(1/4x1-5/8inch)
8.Tensionarm
2.Removethebolt(1/4x1-5/8inch),spacer,andnut
(Figure1).
3.Turnthetensioningbolttoadjustthetensionnutuntil
theedgesofthetensioningtoolalignwiththeedgesof
thetensionnutandtensionarm(Figure1)
4.Aligntheclosestnotchinthetensioningbolttothe
boltholeandsecurethetensioningboltwiththebolt
(1/4x1-5/8inch),spacer,andnut(Figure1).
5.Repeattheprocedurefortheothertrack.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3413-455*A