Setup Instructions

ManualsBrandsToro ManualsRiding EquipmentToro 70125

Printed in Italy

 2002 by The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

13-32

Rear Engine Rider

Model No. 70125—Serial No. 220000001 and Up

Model No. 70184—Serial No. 220000001 and Up

Form No. 3328-177

Setup Instructions

Loose Parts

Description Qty. Use

Wheel

Flat washer

Cotter pin

Installing the front wheels

Seat

Screw, M8 x 18 mm

Flat washer, M9

Lock washer

Installing the seat

Socket pin 1 Attaching the steering wheel

Engine cover

Screw, M6 x 25 mm

Installing the engine cover

Frame

Fabric bag with clips

Handle

Locknut, M8

Washer, M9

Assembling the grass collector

Z-bracket

Bolt, M6 x 16.2 mm

Nut, M6

Grass collector cover

Full bag lever

Installing the grass collector

Bolt, M6

Flat washer, M6.5

Nut, M6

Installing the battery

Recycler



cover 1

Recycling grass clippings; refer to the tractor

Operator’s Manual

Draining funnel 1 Draining the engine oil

Key 2 Use in ignition and KeyChoice



switches

Operator’s Manual

Engine operator’s manual

Read before operating the machine.

Summary of content (4 pages)

PAGE 1
Form No. 3328-177 13-32 Rear Engine Rider Model No. 70125—Serial No. 220000001 and Up Model No. 70184—Serial No. 220000001 and Up Setup Instructions Loose Parts Description Qty. Use Wheel 2 Flat washer 4 Cotter pin 2 Seat 1 Screw, M8 x 18 mm 4 Flat washer, M9 4 Lock washer 4 Socket pin 1 Engine cover 1 Screw, M6 x 25 mm 2 Frame 1 Fabric bag with clips 1 Handle 1 Locknut, M8 2 Washer, M9 4 Z-bracket 2 Bolt, M6 x 16.
PAGE 2
Assembling the Tractor Attaching the Steering Wheel Installing the Front Wheels 1. Rotate the steering wheel up until it is aligned with the steering column. 1. Slide a flat washer onto each spindle (Fig. 1). 2. Secure the steering wheel with the socket pin (Fig. 3). 2. Mount the wheels and secure them with a flat washer and cotter pin (Fig. 1). 3. Grease the wheels. 1 3 1 4 Figure 3 3 1. Socket pin 2 Figure 1 1. Spindle 2. Wheel Installing the Engine Cover 3. Flat washer 4. Cotter pin 1.
PAGE 3
Assembling the Grass Collector 4 1. Slide the bag onto the frame and secure it with the clips (Fig. 5). 5 1 3 2 2 1 m–6101 Figure 7 1. Rear panel 2. Switch 3. Switch plate 4. Full bag lever 5. Screw 4. Attach the grass collector to the rear of the tractor with 2 Z-brackets, bolts (M6 x 16.2 mm), and nuts (M6) (Fig. 8). 1 Figure 5 3. Bag 3 4 4. Frame 2. Secure the handle to the bag assembly with 4 washers (M9) and 2 locknuts (M8) (Fig. 6). 1 2 2 Figure 8 1. Grass collector 2. Z–bracket 3.
PAGE 4
Activating the Battery Warning Bulk electrolyte with 1.260 specific gravity must be purchased from a local battery supply outlet. Charging the battery produces gasses that can explode. Danger Never smoke near the battery and keep sparks and flames away from battery. Battery electrolyte contains sulfuric acid which is a deadly poison and causes severe burns. 7.