Setup Instructions

Figure8
1.Bolt(M6x35mm)4.Grasscollector
2.Z-bracket5.Washer
3.Spacer6.Nut(M6)
5.Attachthegrasscollectorcovertothetractorwith2
pins(Figure9).
Figure9
1.Grasscollectorcover
2.Pin
7
ActivatingtheBattery
Partsneededforthisprocedure:
2Bolts,M6x20mm
4Flatwashers,M6.5
2Nuts,M6
Procedure
Purchasebulkelectrolytewith1.260specicgravity
fromalocalbatterysupplyoutlet.
Batteryelectrolytecontainssulfuricacid,a
deadlypoisonthatcancausesevereburns.
•Donotdrinkelectrolyteandavoidcontact
withskin,eyesorclothing.Wearsafety
glassestoshieldyoureyesandrubbergloves
toprotectyourhands.
•Fillthebatterywherecleanwaterisalways
availableforushingtheskin.
•Followallinstructionsandcomplywithall
safetymessagesontheelectrolytecontainer.
1.Removethebatteryfromthetractorandplaceiton
alevelsurface;refertoRemovingtheBatteryinthe
Operator’sManual.
Important:Neverllthebatterywith
electrolytewhilethebatteryisinstalledinthe
tractor.Youcouldspillelectrolyteonotherparts
andcausecorrosion.
2.Cleanthetopofthebatterywithapapertowel.
3.Removetheventcapsfromthebattery(Figure10).
Figure10
1.Ventcaps3.Lowerline
2.Upperline
4.Slowlypourelectrolyteintoeachbatterycelluntil
theelectrolytelevelisuptotheupperlineonthe
batterycase(Figure10).
Important:Donotoverllthebatterybecause
electrolyte(sulfuricacid)canseverelycorrode
anddamagethechassis.
5.Wait5to10minutesafterllingthebatterycells,
thenaddelectrolyte,ifnecessary,untiltheelectrolyte
levelisuptotheupperline(Figure10)onthebattery
case.
6.Installthebatteryventcaps.
7.Chargethebatteryfor1hourat25to30ampsor
6hoursat4to6amps.Donotoverchargethe
battery.
5