Service Manual

Charge pump
Fig.9
8.Remove three bolts(45) and two bolts(129). [Fig.8]
9.Remove pump body assembly. [Fig.9]
10.Remove O-ring(128), five O-rings(39), two pins
(126), two plugs(23), two O-rings(24) and four plugs
(105). [Fig.10]
11.Remove inner rotor(103) and outer rotor(104).
[Fig.11]
*Inspect rotors. Rotors should be free of all nicks and
scratches.
*Do not drop charge pump rotors(103)(104) and
avoid damage of surfaces.
*Avoid damage of machined surfaces(center case(3)
and pump body(100)).
Fig.8
45
129
Fig.10
Fig.11
104
103
24
23
23 24
105
39
128
126
X4
X5
X2
102
Pump body assembly
Pump body assembly
3
100
4