Service Manual

Center case
Fig.13
12.Remove key(127) and eight bolts(25). [Fig.12]
13.Remove center case assembly, packing(31) and
two pins(40) slowly . [Fig.13]
*Remove valve plates(9) from cylinder block cmp
(51), when removing center case cmp(2).
*Peel off packing that was attached to machined
surfaces(center case(3) and housing(27)).
*Avoid damage of machined surfaces(center case(3)
and housing(27)), when peeling off packing.
Fig.12
25
127
31
40
Fig.14
X8
X2
51
X2
14.Remove two valve plates(9),
two bypass valve cmp(31),
two CR-valve F cmp(7) and
two CR-valve R cmp(8) from
center case(3). [Fig.15]
Fig.15
X2
X2
9
18
7
8
7
8
3
Center case assembly
Center case
assembly
27
5