Service Manual

Center case
15.Bypass valve cmp(18)
CR-valve F cmp(7)
CR-valve R cmp(8) [Fig.16]
16.Remove two plugs(13),
two O-rings(14), spring(12),
valves(11), spring(17), valve
(16), six plugs(23) and
six O-rings(24) from center case
(3). [Fig.17]
17.Valve plate(9). [Fig.18]
Fig.18
16
X6
Fig.17
23
X6
24
17
14 13
13
14
12 11
9
Fig.16
*Do not drop valves(11),(16) and valve plates(9).
*Avoid damage of surfaces(center case(3) and valve plates(9)).
*Inspect valve plates(9). Valve plates(9) should be flat, free of all
nicks, burrs, scratches, and erosion around the port. If scratches
or grooves are detected, valve plates(9)must be replaced.
16
11
7 8
18
CR-valve R cmpCR-valve F cmp
Bypass valve cmp
Groove for
distinction
6