Service Manual

5-35

Z Master 7500-D Series Service Manual

March 2018 - Digital Edition

Table of Contents

CHASSIS

Chassis

Adjusting the Motion Control Neutral Lock Pivot

NOTE: The anged nut can be adjusted to obtain a more desired motion control lever resistance when

moving it to the neutral lock position (Figure 26).

1. Loosen the jam nut.

2. Tighten or loosen the anged nut to the desired feel. For more resistance, tighten the ange nut. For less

resistance, loosen the ange nut.

3. Tighten the jam nut.

Figure 26