Operator's Manual

g008952
Figure23
DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,slowlypullthemotion-control
leversrearward(Figure24).
g008953
Figure24
AdjustingtheHeightofCut
Adjusttheheightofcutfrom25to140mm(1to5-1/2
inches)in6mm(1/4inch)incrementsbymovingthe
clevispinintodifferentholelocations.
1.Withtheenginerunning,pushthedeck-lift
switchrearwarduntilthemowerdeckisfully
raised,andreleasetheswitchimmediately.
2.Rotatetheheight-of-cutpinuntiltherollpin
initlinesupwiththeslotsintheholesinthe
height-of-cutbracketandremoveit(Figure25).
3.Inserttheheight-of-cutpinintothehole
correspondingtothedesiredcuttingheight
(Figure25).
Refertothedecalonthesideofthedeck-lift
platefortheheightsofcut(Figure25).
4.Usingthedeck-liftswitch,movethedeckheight
outofthetransportposition(or5-1/2inches(140
mm)cuttingheight)anddowntotheselected
height.
g227689
Figure25
1.Height-of-cutbracket2.Height-of-cutpin
27