Service Manual

HGM-H 11
TOOLS
TORQUES
REQUIRED TOOLS
Miscellaneous Sockets
Three Jaw Puller 1/2”-3/8” Adapter
Flat Blade Screw Driver (2) 3/8” Deep
Torque Wrench 1-1/8” Deep
Air Impact Wrench 1/4” Allen
Rubber or Neoprene Mallet 3/4” Deep
Breaker Bar
Side Cutters/Snips
Needle Nose Pliers
Large External Snap Ring Pliers
Small Internal Snap Ring Pliers
REQUIRED TORQUE VALUES
Item Description Torque Operation
4 Screw, Housing 280-340 in-lbs (31.6-38.4 Nm) All Housing Screws
10 Nut, Axle, Castlelated 275-350 ft-lbs (372.9-474.5 Nm) Hub
56 Nut, Brake 600-800 in-lbs (67.8-90.4 Nm) Brake Shaft
80 Plug 9/16-16 (Metal) 110-170 in-lbs (12.4-19.2 Nm) Oil Input Port