Operator's Manual

adjustmentboltbyrotatingitcounterclockwise
(Figure87).
Note:Loosenortightenthesingle-point
adjustmentboltenoughtomovethe
height-of-cutplatemountingboltsatleast1/3
thelengthoftheavailabletravelintheirslots.
Thisregainssomeupanddownadjustmenton
eachofthe4decklinks.
g009042
Figure87
1.Single-point-adjustmentbolt
16.Tightenthe2boltsatthebottomofthe
height-of-cutplate(Figure85).
Note:Formostconditions,adjusttheblack
bladetip6.4mm(1/4inch)higherthanthefront.
17.Torquethe2boltsto91to113N∙m(67to83
ft-lb).
18.Measureuntilall4sidesarethecorrect
height.Tightenallthenutsonthedeckliftarm
assemblies.
65