Service Manual

Charge pump
Fig.3
NOTE：
Use cloths or paper towels to catch and clean up any
spilled oil immediately.
Remove parts in a clean place. When removing, take
care not to enter contamination in cases.
When removing O-rings, packing and oil seals, always
replace them. Old O-rings, packing and oil seals may
be worm or damaged and will result in leaks.
Do not remove non-supplied parts.
1.KPS-18T Assembly(1) [Fig.1]
2.Remove filter(119) from pump body(100). [Fig.2]
3.Remove solenoid cmp(135) from pump body(100).
And remove sleeve(132), spool(133) and spring(134)
from pump body(100). [Fig.3, Fig.4]
*Do not drop pin(140) and spool(133).
Fig.1
Fig.2
1
119
135
134
133
132
131
100
140
Fig.4
2