Service Manual

16 HGM-H
AXLE SHAFT AND PLANETARY GEAR SET
14
15
16
21
20
22 (X 3)
23
24
25
26
Figure 8, Planetary Gear Set
Figure 7, Planetary Gear Set
Refer to Figures 7 and 8
Disassembly
1. Remove all external items previously dis-
cussed in their recommended order.
NOTE: Note the location of the ring gear
tabs.
2. Remove the axle bearing (14) and washer
(15).
3. Remove the ring gear (21).
4. Remove the axle shaft (16) and planetary
assembly from the middle housing (2).
5. Remove the axle retaining ring (26), axle
shaft spacer (25), axle gear (24), planet
gears (22), sun gear (23) and the carrier
(20).
NOTE: The sun gear (23) and axle gear (24) are
pressed as one piece in some models.
(Figure 8a)
Inspection
1. Inspect all items of the planetary gear set
for wear and or damage.
Assembly
1. Reassemble all parts in the reverse order
of disassembly.
NOTE: When installing the ring gear assembly
— line up the ring gear tabs with the
housing tabs.
Ring Gear Tabs
Ring Gear
Axle Shaft (16)
Planetary Assembly
2
23 & 24
Figure 8a