Operator's Manual

m–6531

Figure 14

1. Lift lever 2. Button

Positioning the Seat

The seat can move forward and backward. Position the

seat where you have the best control of the machine and

are most comfortable.

1. Raise the seat and loosen the adjustment knobs

(Fig. 15).

2. Slide the seat to the desired position and tighten the

knobs.

m–4982

Figure 15

1. Adjustment knob

Headlights

The headlights are turned on with a separate position,

lights, of the ignition switch (Fig. 16). The lights are on

while the ignition switch is in the lights position even with

the engine off. Remove the key when the machine is left

unattended so lights can not be turned or discharging the

battery.

1208

Figure 16

1. Lights

Positioning the Tilt Steering

Wheel

The steering wheel has four tilt locations. Position the

steering wheel where you have the best control of the

machine and are most comfortable.

1. Lift the tilt lever to release the lock (Fig. 17).

2. Move the steering wheel to a comfortable position;

then release the lever to lock.

1203b

Figure 17

1. Tilt lever 2. Steering wheel

Using the Cruise Control

A three position switch, located on the dash (Fig.18), with

the functions of: Lock–Set (spring loaded), On and

Unlock–Off controls the engagement. Cruise control

maintains the traction control position without foot

pressure. Cruise control is intended for operation in the

forward direction only. Do not use cruise control in

reverse.