Service Manual

310-3000 IHT 13
Miscellaneous
310-3000 Service & Repair Manual
Loctite
Flat Blade Screw Driver
Torque Wrench
Air Impact Wrench
Pliers
Needle Nose
External Snap Ring
Internal Snap Ring
HOW TO USE THIS
MANUAL
Many of the parts and subassemblies of this
transaxle can be removed and serviced indepen-
dently of other components. The disassembly,
inspection, and assembly portions of this manual
are therefore laid out in subsections. Each as-
sembly is treated as a unit, and the disassem-
bly, inspection, and assembly procedures follow
one another.
Where some components and assemblies must
be removed before a given assembly can be
serviced, that information is given at the begin-
ning of the disassembly instructions.
Subassemblies removed to reach another com-
ponent or feature need not be fully disassembled.
They may be reassembled intact following the
necessary repairs.
Each assembly is provided with an exploded
view showing the parts involved. At the end of
the manual, after the reassembly summary, a
complete exploded views and items lists are pro-
vided.
Allen Wrenches
5 mm, 6 mm, 1/4 inch
Sockets
3/8" Drive: 7/16", 1/2", 13/16"
1/2” Drive: 9/16", 15/16", 1-1/8"
#8 Internal Torx Drive
#10 Internal Torx Drive
Socket Drivers
3/8", 1/2"
Combination Wrenches
7/16", 1/2", 9/16", 13/16", 15/16", 1-1/8"
Table 4. Required Tools
Operation Torque Item #Part Description
Center Section Screws (Item #4) 525-700 lb-in 44 Screw
Lower Housing Screws (Item # 50) 135-185 lb-in 50 Screw
Charge Pump Cover Screws (Item # 29) 87-108 lb-in 29 M6 x 1-22
Axle Shaft Jam Nut (Item # 73) 660-800 lb-in 73 5/16-18
Right Hand Housing Screws (Item # 80) 230-290 lb-in 80 5/16-18
Axle Hub Nut (Item # 119) 200-295 lb-ft 119 3/4-16
Pulley Nut (Item # 115) 360-520 lb-ft 115 Jam Nut
Fan Screws (Item # 107) 35-50 lb-in 107 Screw
Bypass Screw (Item # 138) 42-62 lb-in 138 10-32 x 1/2
Torque Bracket Nut (Item # 142) 160-210 lb-in 142 5/16-18
Control Arm Stud (Item # 36) 50-120 lb-in 36 5/16-24
Trunnion Shaft Nut (Item # 95) 180-240 lb-in 95 5/16-24
Control Bearing Screw (Item # 92) 190-240 lb-in 92 Screw
Control Arm Nut (Item # 95) 85-120 lb-in 95 5/16-24
Adjusting Puck Screw (Item # 88) 250-320 lb-in 88 5/16-24 x 1-3/4
Brake Nuts (Item # 127) 80-120 lb-in 127 1/4-20
Table 5. Required Torque Values