Installation Instructions

ManualsBrandsToro ManualsAttachments, Parts & AccessoriesToro 7278

FormNo.3370-798RevA

ReceiverHitchKit

Workman

MDSeriesUtilityVehicles

ModelNo.07278

InstallationInstructions

Safety

SafetyandInstructional

Decals

Safetydecalsandinstructionsareeasily

visibletotheoperatorandarelocated

nearanyareaofpotentialdanger.

Replaceanydecalthatisdamagedor

lost.

104–6996

1.ForWorkman1100,2100,

andTwister1400:the

maximumtongueweight

is100lb(45kg)andthe

maximumtrailerweightis

800lb(363kg).

2.ForWorkman2110,

WorkmanMD,Workman

MDX,andTwister1600:

themaximumtongue

weightis100lb(45kg)

andthemaximumtrailer

weightis1200lb(544kg).

Installation

InstallingtheReceiverHitch

FortheWorkman1100/2100/2110and

Twister1400/1600

1.Positionthemachineonalevelsurface.Setthe

parkingbrake,turntheignitionoff,andremovethe

key.

CAUTION

Ifyouleavethekeyintheignitionswitch,

someonecouldaccidentlystarttheengineand

seriouslyinjureyouorotherbystanders.Remove

thekeyfromtheignitionswitchbeforeyoudo

anymaintenance.

2.Removetheexistinghitchfromtherearframe.

3.Attachthereceiverhitchtotherearframewith4

angeheadboltsandangenuts(

Figure1).

G016937

Figure1

1.Receiverhitch3.Flangenut

2.Flangeheadbolt

Note:A2inchx2inchstandardballmountisnot

includedwiththiskit.Onecanbepurchasedatahitch

dealerorautomotivepartsstore.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (2 pages)

PAGE 1
Form No. 3370-798 Rev A Receiver Hitch Kit Workman® MD Series Utility Vehicles Model No. 07278 Installation Instructions Safety Installation Safety and Instructional Decals Installing the Receiver Hitch Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or lost. For the Workman 1100/2100/2110 and Twister 1400/1600 1. Position the machine on a level surface.
PAGE 2
For the Workman MD/MDX Operation 1. Position the machine on a level surface. Set the parking brake, turn the ignition off, and remove the key. Hitch Interference Because ball mounts vary in design and shape they should be removed from the receiver before lifting the cargo bed to avoid possible interference. CAUTION If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure you or other bystanders.