Service Manual
CHASSIS
3-35Toro Z Master G3 3000/5000/6000 Series Service Manual
3
6. Pull the brake cable out of the cable anchor on the
transmission and slide it out of the slot (Fig. 126).
Fig. 126 DSCN-4325a
7. Squeeze the tabs on the conduit îš¿tting and remove it
from cable bracket located on the frame (Fig. 127).
Fig. 127 DSCN-4327a
Fig. 128 DSCN-4328a
8. Remove the two clips retaining the brake cable to
the frame (Fig. 128).
9. Remove the two screws retaining the right hand
motion control cover assembly to the frame and
remove (Fig. 129).
Fig. 129 DSCN-2614a