Service Manual

CHASSIS
3-36 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
10. Unplug the wire harness from the park brake switch
(Fig. 130).
Fig. 130 DSCN-2617a
12. Remove the cotter pin and clevis pin on the left side
of the park brake handle (Fig. 132).
Fig. 132 DSCN-4330a
13. Remove the e-ring retaining the brake cable to the
park brake pivot assembly and slide the cables out
of the slots (Fig. 133). Slide the brake cable out of
the unit.
Fig. 133 DSCN-4333
11. Remove two screws and spacers retaining the park
brake handle assembly to the frame (Fig. 131).
Fig. 131 DSCN-2619a