Service Manual

5003 - 501 0 DIFFERENTIAL
1.
FIGURE 4
2. Place the spider gears in position, as shown in
Figure
6, slide the differential pins into position
through the spiders and secure with roll pins.
NOTE: The spiders must be placed in position
as shown, and the diagonally opposite spiders
should be in the same direction.
Check for prop-
er operation.
To assemble the differential (see breakdown Fig-
ure
4) place the axle gears in the differential
case, insert the Woodruff keys in the axles,
slide
the axles into the axle gears and drive in the
retaining roll pins. (Figure
5 shows the axles,
gears and roll pins assembled.)
If the axles will
not
slide freely into the axle gears, place a
spacer between the two axle gears, which will
hold them apart enabling the axles to be driven
into position.
For installation in transmission case, the Transmis-
sion Assembly Section.
FIGURE
5
- 11 -