Service Manual
4.
Install the differential bull gear. over the pinion shafts, mesh the gears and seat
5.
Install the remaining axle and gear assembly in
the case against the ring gear.
the remaining differential case.
7.
Center the bull gear and install the four
(4)
re-
taining bolts, and nuts. Tighten securely and
6.
Position the axle and gear, and differential case evenly to avoid distortion.
4-SPEED
TRANSMISSION
2-22
2-23
I
ONE PIECE (SOLID PINION) DIFFERENTIAL
TWO PIECE (PINION
&
SHAFT) DIFFERENTIAL
-
43
-