Operator's Manual

g232012
Figure77
1.Single-pointheight
adjustmentbolt
3.Rearheight-of-cutplate
mountingbolt
2.Frontheight-of-cutplate
mountingbolt
14.Toadjustthesingle-pointsystem,rstloosen
thefrontandrearheight-of-cutplatemounting
bolts(Figure77).
Note:RearDischargeMachinesOnly:The
mowerdeckisattachedinthefrontholesatthe
factory(Figure78).Ifneeded,usetheback
holesforfurtheradjustmentwhenlevelingthe
mowerdeck.
g025558
Figure78
1.Mowerdeck3.Backhole
2.Fronthole
15.Ifthedeckistoolow,tightenthesingle-point
adjustmentboltbyrotatingitclockwise.If
thedeckistoohigh,loosenthesingle-point
adjustmentboltbyrotatingitcounterclockwise
(Figure79).
Note:Loosenortightenthesingle-point
adjustmentboltenoughtomovethe
height-of-cutplatemountingboltsatleast1/3
thelengthoftheavailabletravelintheirslots.
Thisregainssomeupanddownadjustmenton
eachofthe4decklinks.
g009042
Figure79
1.Single-point-adjustmentbolt
16.Tightenthe2boltsatthebottomofthe
height-of-cutplate(Figure77).
Note:Formostconditions,adjusttheblack
bladetip6.4mm(1/4inch)higherthanthefront.
17.Torquethe2boltsto91to113N∙m(67to83
ft-lb).
18.Measureuntilall4sidesarethecorrect
height.Tightenallthenutsonthedeckliftarm
assemblies.
58