Operator's Manual

Operation

Pushing the Machine by Hand

IMPORTANT: Always push the machine by

hand. Never tow the machine because

hydraulic damage may occur.

To Push the Machine

1. Disengage the power take off (PTO) and turn the

ignition key to “OFF” to stop the engine.

2. Rotate pump by-pass valves counterclockwise 2

turns to push. This allows hydraulic fluid to

by-pass the pump enabling the wheels to turn

(Fig. 12).

IMPORTANT: Rotate by-pass valve a

maximum of 2 turns so the valve does not

come out of the body causing fluid to run out.

3. Release the parking brake.

To Operate the Machine

1. Turn the by-pass valves in to operate (Fig. 12).

Note: The machine will not drive unless

by-pass valves are turned in.

m–3305

Figure 12

1. By-pass valve