Operator's Manual

13
Operation
Think Safety First
Please carefully read all the safety instructions on
pages 2–8. Knowing this information could help you,
your family, pets or bystanders avoid injury.
Controls
Become familiar with all the controls (Fig. 1) before
you start the engine and operate the machine.
1
2
5
10
m–3179
3
8
9
7
4
6
Figure 1
1. Motion control lever
2. Parking brake
3. Ignition switch
4. Throttle
5. Power take off (PTO)
6. Hourmeter
7. Choke
8. Drink holder
9. Fuel cap
10. Hydro reservoir cap
Parking Brake
Always set the parking brake when you stop the
machine or leave it unattended.
Setting the Parking Brake
1. Move the motion control levers to the neutral
(Fig. 1).
2. Pull up on the parking brake lever to set the
parking brake (Fig. 2). The parking brake lever
should stay firmly in the “SET” position.
Releasing the Parking Brake
1. Push in on the button and lower parking brake
lever to “OFF” (Fig. 2).
1
3
m–3287
2
Figure 2
1. Parking brake–SET
2. Button
3. Parking brake-OFF