Operator's Manual

Maintenance
31
4. Remove belts over clutch (Fig. 32).
m–3295
2
3
1
4
7
6
5
Figure 31
1. Idler
2. Spring
3. Gr box pulley
4. Clutch hub
5. Stop
6. Bolt
7. Washer
5. Install new belts over clutch. Align clutch hub
key with crankshaft keyway and notch with stop
bracket. Slide clutch onto crankshaft (Fig. 32).
6. Apply Loctite (blue) thread lock to threads and
install washer and bolt securing clutch.
7. Torque clutch mounting bolt to 50–60 ft–lb.
(68–81 N
m).
8. Route belts around clutch and gearbox pulleys
and above spring loaded idler (Fig. 32).
9. Hold spring loaded idler against belts and pull
spring down to install on lower bolt mount
(Fig. 31).
m–3225
4
2
3
1
Figure 32
1. PTO belt
2. Clutch pulleys
3. Gearbox pulley
4. Spring loaded idler