Service Manual

HY13-1512-006-M1/USA
Torqmotor™ Service Procedure
TC, TS, TB, TE, TJ, TF, TG, TH and TL Series
Parker Hannifi n Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 US
24
EXPLODED VIEW SPEED SENSOR
ITEM # 12 12
COUPLING COUPLING
DESCRIPTION SHAFT SHAFT SENSOR
01- Long 6B Snapwire Groove ME019001 ME019301 455069
02- Long Woodruff, 1/4” Tap Snapwire Groove ME019002 ME019302 455069
03- 1.25” Straight Keyed 5/8-18 Int. Thd. ME019003 ME019303 455069
04- 10B Spline ME019004 ME019304
05- 14 Tooth Spline 5/8-18 Int. Thd. ME019005 ME019305 455069
06- 19 Tooth Spline ME019006
07- 15 Tooth Spline ME019007
08- 1.25” Tapered Shaft ME019000 ME019300 455069
19- 1.38” Tapered 1.125-18 Thd. ME019010
20- 1.38” Straight Key 5/8 Tap ME019011 ME019311
†
(Not available in clutch motor)
SPEED CLUTCH
EXPLODED VIEW SENSOR MOTOR
ITEM # 12 12 12 12A 12B 12C 12D 12E 12F
COUPLING COUPLING COUPLING 5/8-18 LOCK RETAINING
DESCRIPTION SHAFT SHAFT SHAFT KEY NUT WASHER BOLT WASHER RING
01- Long 6B Snapwire Groove MB019001 MB019301
02- Long Woodruff, 1/4” Tap Snapwire Groove MB019002 MB019302 038015
03- 1.25” Straight Keyed 5/8-18 Int. Thd. MB019003 MB019303 093044 039028 028413 021482 028992 401333
04- 10B Spline MB019004 MB019304
05- 14 Tooth Spline 5/8-18 Int. Thd. MB019005 MB019305 093043 028413 021482 028992
06- 19 Tooth Spline MB019006
07- 15 Tooth Spline MB019007 MB019307
08- 1.25” Tapered Shaft MB019000 MB019300 038016
3
025126
17- 19 Tooth Spline (16/32) MB019011
22- 25mm Str. w/7mm Key MB019009 MB019309
26- 25mm Str. w/8mm Key MB019017 MB019317
28- 13 Tooth Spline (16/32) MB019023 MB019323
58- 1.25” Str. Nitrotec C MB019040
TF Service Parts List Chart
EXPLODED VIEW
ITEM #
2
1, 1A, 1B, 1C 2 3 4 16
6
21 & 22
4,6
22
6
23
6
24 12B
END COMMUTATOR SEAL INNER PLUG & O-RING CASTLE
DESCRIPTION BOLT (7) COVER SEAL RING (5) SEAL ASSEMBLY O-RING SPRING (2) VALVE NUT SENSOR
AAAA Black Paint Item #1 032435 032819 032817
AAAC Corrosion Resistant Paint Item #1 032435 032819 032817
AAAF Castle Nut Replacing Item #1 032435 032819 032817 025113
Patch Lock Nut
AAAG Fluorocarbon Seals, Black Paint Item #1 032435 032820 032818
AAAH Fluorocarbon Seals, No Paint Item #1 032435 032820 032818
AAAT Bidirectional Shuttle Valve 11:00 Item #1A
6
ME016003A1 032435 032819 032817 036297 032791 401642 415569
AAAU Bidirectional Shuttle Valve Item #1A
6
ME016003A1 032435 032819 032817 036297 032791 401642 415569 025113
11:00 & Castle Nut
BBBA 1000 PSI Cross Port Item #1C
6
ME016004A1 032435 032819 032817 411063A1 032424 41001210 (2), 1000 PSI
Relief Endcover, Black Paint
BBBG 1500 PSI Cross Port Item #1C ME016004A5 032435 032819 032817 411063A1 032424 41000976 (2), 1500 PSI
Relief Endcover, Black Paint
BBBB 2000 PSI Cross Port Item #1C
6
ME016004A2 032435 032819 032817 411063A1 032424 41001220 (2), 2000 PSI
Relief Endcover, Black Paint
BBCG 2500 PSI Int. Bidirectional Item # 1C ME016004A6 032435 032819 032817 411063A1 032424 41001225 (2), 2500 PSI
Relief Endcover, No Paint
BBCX 2500 PSI Int. Bidirectional Item # 1C ME016004A6 032435 032819 032817 411063A1 032424 41001225 (2), 2500 PSI
Relief Endcover, No Nut, Black Paint
BBCW 3000 PSI Int. Bidirectional Item # 1C ME016004A3 032435 032819 032817 411063A1 032424 41001230 (2), 3000 PSI
Relief Endcover, No Nut, No Paint
BBBC 3000 PSI Cross Port Item #1C
6
ME016004A3 032435 032819 032817 411063A1 032424 41001230 (2), 3000 PSI
Relief Endcover, Black Paint
BBBD 4000 PSI Cross Port Item #1C
6
ME016004A4 032435 032819 032817 411063A1 032424 41001240 (2), 4000 PSI
Relief Endcover, Black Paint
DDDA Clutch Motor Item #1 ME016000 032435 032819 032817
FSAA Speed Sensor Option Item #1 ME016000 032435 032819 032817 455069
OPTION GROUP
For reverse timed manifold, use ME015001.
1
Service housing ass’y ITEM #18 with part number suffix-A1 includes ITEM
#13, #14 two req’d, #15 and #19.
2
Select the required bolt number in designated “DISPLACEMENT GROUP”
under bolt ITEM #1, 1A, 1B or 1C shown in designated “OPTION GROUP.”
3
1-20 UNEF slotted nut #025113 is required on 1-1/4” tapered shaft if the designated “OP-
TION GROUP” is AAAF, AAAN, or AAAU.
4
ITEM #22 is part of plug & o-ring assy’s but can be serviced separately.
5
Service endcover ME016001J1 includes two #032790 o-rings, ITEM 18A on
the exploded ass’y view that can also be serviced separately.
6
End cover assembly item #2 also includes item #21, #22, #24 and if
required item #23. All but item #21 can be serviced separately.
7
ME018001A1 commutator ass’y. is required if the designated “OPTION GROUP”
is AAAM, AAAN, or AAAP.
8
Order (2) #032790 seals for parts when ordering manifold-style porting.
Standard seal kit #SK000092 includes six #032819 seal rings, #032435 commutator seal,
#032817 inner seal, #028515 and #029118 back washers, #478035 dirt & water, #406018
grease pack, bulletin #050016.
Special seal kit #SK000093 for units that use fire retardant fluids includes six #032820 seal
rings, #032435 commutator seal, #032818 inner seal, #028515 and #029118 back up wash-
ers, #478035 dirt & water seal, #406018 grease pack, bulletin #050016.
Vespel commutator seal AADJ #032439. High temperature seal black in color.
* Standard seal kit #SK000092 for motor only. If repairing clutch, need #SK000039. Kit in-
cludes two #067033 bearing and cone assemblies, two #400140 bearing cups, one #400141
thrust washer, one #401622 snap ring, one #401632 retaining ring, and one #478030 dirt
and water seal.
#SK000099 Vespel commutator seal kit, #032439 Vespel seal, #032817 inner seal, #028515
and #029118 back up washers, #478035 dirt & water seal, #032819 six seal rings, #406018
grease pack, bulletin #050016.
COUPLING SHAFT GROUPCOUPLING SHAFT GROUP FOR
DISP.-0360, -0405, -0475 ONLY
†