Operator's Manual

g006839
Figure54
1.3mm(1/8inch)4.Rotatethewireformguide
tothecenterbeltsinthe
guide.
2.11mm(7/16inch)5.6mm(1/4inch)
3.3mm(1/8inch)clearance6.8mm(5/16inch)
ControlsSystem
Maintenance
AdjustingtheReverse-Stop
Rod
1.Stopthemachineandmovethespeed-control
levertotheNEUTRALposition.
2.DisengagethePTO,engagetheparkingbrake,
shutofftheengine,andwaitforallmovingparts
tostop.
3.Checkthemovementofthesteeringleversas
follows:
•Iftheleversmoveslightlyforwardupto3mm
(1/8inch)thennoadjustmentisnecessary.
•Iftheleversdonotmove,thenproceedwith
thefollowingsteps:
A.Fliptheseatuporremovethe
seat-frameassembly(withtheseat
attached)toobtainaclearviewofthe
steering-controlshafttocompletethis
adjustment.
B.Placethespeed-controlleverinthe
NEUTRALposition.
C.Releasetheparkingbrake.
D.Slightlyadjustthelengthoftherodby
looseningthejamnutandbyrotating
therod.
g020490
Figure55
1.Parkingbrake
4.Speed-controllever
2.Nut
5.Clevispinandstoprod
3.Steeringlever
E.Engagetheparkingbrakeandcheckthe
steeringlevers.
48